Text only | Text with Images

coppermine-gallery.com/forum

Support => Older/other versions => cpg1.3.x Support => Topic started by: technogecko on March 17, 2005, 06:58:23 AM

Title: How To Enable Debug W/O Admin Page
Post by: technogecko on March 17, 2005, 06:58:23 AM
Recently had a hard disk failure but luckily I was able to backup the mysql db and the entire coppermine directory after the drive was recovered. However, after reloading the coppermine directory and mysql database it gives me a 'There was an error while processing a database query' message on any page (index,admin,config,etc).

Typically I'd just flip the switch on debug mode and see what is going on but since I can't load the config page, is there another way to see what the exact error message is or set the debug mode w/o being able to access the config menu?

Thanks in advance,

Jason
Title: Re: How To Enable Debug W/O Admin Page
Post by: foulu on March 17, 2005, 07:00:04 AM
edit it via phpmyadmin
Title: Re: How To Enable Debug W/O Admin Page
Post by: kegobeer on March 17, 2005, 07:05:53 AM
cpg132_config - look for debug_mode.  Set to 1.
Text only | Text with Images