Print Page - [solved]IPB_203 with CPG 1.32

Title: [solved]IPB_203 with CPG 1.32
Post by: Powerbob on March 27, 2005, 04:04:54 PM

Just updated my CPG to 1.32 after upgrading my invision board from 1.3.1 to 2.03.
I can get in fine, and so can all the members, but the albums are no longer visable, nor is "User Galleries" under which they were all stored.

any help would be appreciated :-[

Powerbob

Title: Re: IPB_203 with CPG 1.32
Post by: Nibbler on March 27, 2005, 04:09:56 PM

Link ? test account ? what bridge file version are you using ? details of bridge file which you have changed ?

Title: Re: IPB_203 with CPG 1.32
Post by: Powerbob on March 27, 2005, 06:30:19 PM

oops :-[

http://ofbboard.com/IPB2_03/index.php

user = test
passw = test

Quote
Id: invisionboard.inc.php,v 1.8 2004/07/24 15:04:10
Invision Power Board v1.1 Integration for Coppermine

thanks

Powerbob

Title: Re: IPB_203 with CPG 1.32
Post by: Nibbler on March 27, 2005, 06:47:59 PM

If you are using IPB2 then you need to be using the IPB2 bridge file.

http://forum.coppermine-gallery.net/index.php?topic=8334.0

Title: Re: IPB_203 with CPG 1.32
Post by: Powerbob on March 27, 2005, 07:25:47 PM

This is where it gets confusing, I have upgraded to 1.3.2 and the link you gave is for 1.3.1 ???? ???

Powerbob

Title: Re: IPB_203 with CPG 1.32
Post by: Nibbler on March 27, 2005, 08:58:16 PM

All versions of 1.3.x are virtually the same.

Title: Re: IPB_203 with CPG 1.32
Post by: Powerbob on March 28, 2005, 12:39:21 PM

Ok that clears that up ;D

I am at the stage now where I am recognized as user, but not admin. Only my album is visable in User galleries, ??
Other users can't upload, says no album to upload to!

Powerbob

Title: Re: IPB_203 with CPG 1.32
Post by: Nibbler on March 28, 2005, 03:18:46 PM

Should be working now, you had the wrong bridge settings and the wrong bridge file in use. Use the groups page to fix group permissions.

Title: Re: IPB_203 with CPG 1.32
Post by: Powerbob on March 29, 2005, 09:34:23 AM

thanks Nibbler ;D , It is a bit confusing though with the different versions of the bridge file that are about!
But it now works super, thanks to you ;D

Powerbob

coppermine-gallery.com/forum

Support => cpg1.3.x Support => Older/other versions => cpg1.3 (BBS) Integration / Bridging => Topic started by: Powerbob on March 27, 2005, 04:04:54 PM