Print Page - Installing bridge to smf from existing coppermine

Title: Installing bridge to smf from existing coppermine
Post by: KlausSp on June 07, 2005, 11:04:52 PM

Hi!

Currently I am using yabbse with a functional bridge to coppermine. I now plan to upgrade to smf. In the smf-coppermine bridge provided with v1.3.2 there is a warning:
// WARNING : Do not activate this bridge if you already have pictures or //
// usergroups in your gallery.

So what can I do? I already have pictures and stuff in the gallery, so how can I bridge it to smf after upgrading? Help me ???

Best regards

Klaus

Title: Re: Installing bridge to smf from existing coppermine
Post by: kegobeer on June 07, 2005, 11:07:42 PM

Do you have members with personal galleries?

Title: Re: Installing bridge to smf from existing coppermine
Post by: KlausSp on June 08, 2005, 04:28:36 PM

Hi!

Here is the link to the forum: http://forum.musikding.de/yabbse/index.php
Here is the gallery: http://forum.musikding.de/gallery/index.php

Currently there are 20 users who have posted pictures in their galleries.

Regards

Klaus

Title: Re: Installing bridge to smf from existing coppermine
Post by: Nibbler on June 08, 2005, 04:39:51 PM

It depends if the userids of your members will be the same after upgrade. If they are then it will be no problem. Otherwise, you only have 20 users, so you can note their ids and fix Coppermine afterwards.

Title: Re: Installing bridge to smf from existing coppermine
Post by: KlausSp on June 08, 2005, 05:19:28 PM

Hi!

So if the member_ids are the same after upgrading, everything will work? And you are right, with 20 users I could fix it by hand if it should not work. Where does coppermine store the ids of the members?

I think I will try the upgrade, hoping everything will continue to work aftwards ;D

Best regards,

Klaus

coppermine-gallery.com/forum

Support => cpg1.3.x Support => Older/other versions => cpg1.3 (BBS) Integration / Bridging => Topic started by: KlausSp on June 07, 2005, 11:04:52 PM