coppermine-gallery.com/forum

Support => cpg1.4.x Support => Older/other versions => cpg1.4 pnCPG (Coppermine for postNuke/Zikula) => Topic started by: volkan on August 06, 2005, 08:35:58 PM

Title: Confused !!!!!!!!
Post by: volkan on August 06, 2005, 08:35:58 PM
Hi,
Im running pn0.726 andit reads:

Powered by Coppermine Photo Gallery v1.2.0-Nuke
for phpNuke by Coppermine Nuke Dev Team

See it here.
http://www.rc-expertise.com/modules.php?op=modload&name=coppermine&file=index

I am running postnuke....
Is there a seperate module for PN then php-nuke????

If so, could somebody please point me in the direction of the
download....

Please let me know.
Title: Re: Confused !!!!!!!!
Post by: casNuy on August 06, 2005, 08:49:07 PM
This mod is no longer supported as far as I know.
So you can start using pnCPG if you want to integrate it with your PN site.

Cas
Title: Re: Confused !!!!!!!!
Post by: volkan on August 06, 2005, 08:57:09 PM
with pn coppermine, do the comments work?
also, will I loose all the albums and photos, if so, i need
to backup my files and db.

Also, i see way to many cpgs!!!
Can you please point me in the direction of the correct download.
Title: Re: Confused !!!!!!!!
Post by: casNuy on August 06, 2005, 09:07:54 PM
Just download pnCPG 2.7 and use this is combination witgh the standard Coppermine installation.
Normally tou will not use anything using onCPG, hopefully all works out ok with moving to stabdard Coppermine.
make a backup first !!!

Cas
Title: Re: Confused !!!!!!!!
Post by: volkan on August 06, 2005, 10:10:29 PM
Im still a bit confused!
The typos dont help!
So I download 2.7 from this: http://forum.coppermine-gallery.net/index.php?topic=19600.0

Then 1.3.3 from http://sourceforge.net/project/showfiles.php?group_id=89658&package_id=98538

Put the two together, then drop it in the modules folder?

Sorry for this...


Volkan Dil
Title: Re: Confused !!!!!!!!
Post by: volkan on August 07, 2005, 12:51:35 PM
Well, i followed the instructions and did it.
The admin side of things work fine...

But when i link to pncpg useing {}

I get the 404 error.

See foryourself http://www.rc-expertise.com/index.php?module=pnCPG&func=main

I installed coppermine 1.3.3 in the PN Root.
Title: Re: Confused !!!!!!!!
Post by: casNuy on August 13, 2005, 05:38:45 PM
Looks like you got it to work in a different way ?

cas
Title: Re: Confused !!!!!!!!
Post by: volkan on August 19, 2005, 01:35:21 AM
na, i just gave up :(
I tried this pncpg installation on a fresh pn install, and i got the same problem......

oh well, i just really want to get the comments working...