coppermine-gallery.com/forum

Support => cpg1.4.x Support => Older/other versions => cpg1.4 upload => Topic started by: tropikey on March 08, 2006, 06:26:49 PM

Title: I just don,t know what to do!
Post by: tropikey on March 08, 2006, 06:26:49 PM
hello everybody,

I've been trying to upload pictures to my new CPG 1.4.4 but can't do it. There's always an information that a certain file can't be inserted in album because an intermediate picture or thumbnail can't be created. If you'd like to try it on your own, here is the link: http://tropikey.com/galeria/upload.php (http://tropikey.com/galeria/upload.php). This is what the debbuger says:

***
USER:
------------------
Array
(
    [ID] => 6a476783b3896f9de87dca752ef9701a
    [am] => 1
    [lang] => polish
)

==========================
USER DATA:
------------------
Array
(
    [user_id] => 1
    [user_name] => korvacs
    [groups] => Array
        (
           
Title: Re: I just don,t know what to do!
Post by: Joachim Müller on March 08, 2006, 07:06:33 PM
http://coppermine-gallery.net/demo/cpg14x/docs/index.htm#upload_trouble
Title: Re: I just don,t know what to do!
Post by: tropikey on March 08, 2006, 10:41:06 PM
thank you GauGau, but have no idea what you mean... I don't see any answer or solution in the doc which you suggest. Could you, please, give me more details?

Bartek
Title: Re: I just don,t know what to do!
Post by: Joachim Müller on March 09, 2006, 05:42:22 AM
How about doing exactly as suggested in the upload troubleshooting I refered to? Especially the section highlighted in red? Let me quote it for you:
Quote4.11.4 Upload troubleshooting

If you are experiencing issues with coppermine's upload process, temporarily change your coppermine settings as suggested below to get more detailed error messages:

    * Go to your coppermine page and log in as admin
    * Go to the config screen
    * Scroll to the bottom of the page
    * Expand the "Maintenance settings" section by clicking on it
    * Enable debug mode for everyone
    * Leave display of notices switched off
    * Save the new settings by clicking on "Save new configuration"
    * Go to the "groups" panel
    * Set the upload form configuration for all groups to "Single file uploads only" (set File upload boxes to "1", URI upload boxes to "0" and No. of boxes to "fixed")
    * Save your new settings

Then try to upload (using http uploads, even if you experienced troubles using another upload method) - you should get a more detailed error message that tells you what exactly goes wrong with your uploads. If the error message doesn't mean anything to you, search the support board for the error message you get.
When asking for support on the coppermine forum, post a link to your site and a test user account (the test user mustn't be in the admin group!) with upload privileges, with the above mentioned settings in place - this way, supporters can see the error messages as well. Do not post debug_output unless requested.
Title: Re: I just don,t know what to do!
Post by: tropikey on March 09, 2006, 04:07:10 PM
hi,

this is what I did (at least, in my opinion). Well, I posted also debug_output, what I wasn't supposed to do according to point 4.11.4 of CPG docs, but just wanted to get an answer as soon as possible. Is there anybody who could help me understand this debug_output and make the upload work ok?

Best regards

Bartek
Title: Re: I just don,t know what to do!
Post by: Nibbler on March 09, 2006, 04:24:20 PM
So, in your opinion, would you say that you have posted a test user account with upload privileges ?