Is cpg 1.4.19 bridge for smf 2.0 beta3 Public Compatible with smf 2.0 Beta4 Public?
Thanks
Bob
Try it and see.
Ok tried it and now "know" it isn't ;D
No problems with Beta3 before, now, just brings you back to forum!
CPG 1.4.19
http://ofbboard.com/cpg1410/index.php (http://ofbboard.com/cpg1410/index.php)
SMF 2.0.Beta 4
http://ofbboard.com/ofbforum/index.php (http://ofbboard.com/ofbforum/index.php)
Test account=tester password=tester
BridgeManager settings:
Forum URL: http://ofbboard.com/ofbforum
Relative path to BBS's config file: ../ofbforum/
Use post-based groups?: 1
Site not suitable for under 18 years
[Edit GauGau] Warning: links below are not safe for work! [/Edit]
Test http://forum.coppermine-gallery.net/index.php/topic,55601.0.html and report back!
Sorry, no change. Still in login loop, ie click on coppermine gallery and brings me to forum!
Quote from: Powerbob on October 07, 2008, 09:20:41 AM
Ok tried it and now "know" it isn't ;D
No problems with Beta3 before, now, just brings you back to forum!
CPG 1.4.19
http://ofbboard.com/cpg1410/index.php (http://ofbboard.com/cpg1410/index.php)
SMF 2.0.Beta 4
http://ofbboard.com/ofbforum/index.php (http://ofbboard.com/ofbforum/index.php)
Test account=tester password=tester
BridgeManager settings:
Forum URL: http://ofbboard.com/ofbforum
Relative path to BBS's config file: ../ofbforum/
Use post-based groups?: 1
Site not suitable for under 18 years
[Edit GauGau] Warning: links below are not safe for work! [/Edit]
I have re-installed coppermine, new
CPG 1.4.19
(http://ofbboard.com/cpg/index.php%5B/url)
New directory for coppermine= http://ofbboard.com/cpg/index.php
It's not bridged - clicking on the "login" link brings me to coppermine's login page. Turn bridging on please.
Sorry was trying something out but it didn't work. ::)
I have now enabled bridge again.
Bob
Temporarily enable "Allow unlogged users (guest or anonymous) access" in coppermine's config to give us a chance to look at the issue without permanently being redirected to your board. After all, the gallery is empty, so there's currently no reason to be paranoid.
Bridging is disabled again. I haven't asked for a PM.
I have to disable to get into config ;D
Now done, will enable bridging again
:-[ Bump
Ok as I was getting the same result (login loop) with the clean install I have restored my backup so I have now my original back.
Bridging is enabled again
What now please?
Quote from: Powerbob on October 11, 2008, 12:59:33 PM
Ok as I was getting the same result (login loop) with the clean install I have restored my backup so I have now my original back.
Bridging is enabled again
What now please?
I already told you:
Quote from: Joachim Müller on October 08, 2008, 10:59:49 PM
Temporarily enable "Allow unlogged users (guest or anonymous) access" in coppermine's config to give us a chance to look at the issue without permanently being redirected to your board. After all, the gallery is empty, so there's currently no reason to be paranoid.
Done!
Bridging is disabled on http://ofbboard.com/cpg1410/. You're not suppossed to turn off bridging. Please re-read my instructions carefully, do as suggested and then post again.
Done!
No, not done: when trying to access your gallery I'm being re-directed immediately to your forum, since you require each and every user to log in before being allowed to view your gallery. You just bluntly re-enabled bridging without looking at the instructions I have posted. You're supposed to turn the feature off that sends visitors to the login screen immediately, for christ's sake (at least temporarily to give us the time to look at the output of your gallery).
Quote from: Joachim Müller on October 13, 2008, 07:35:38 AM
I already told you:
That's what I have done Sir! I can't help it if it doesn't work can I?
I will re-check ok?
To do that I will disable bridging, then check to make 100% sure, then enable bridging again.
Back in 5 mins.
Attach a screenshot of coppermine's config screen to your posting, with the section "User settings" expanded.
Done!
It appears that this setting is not being taken into account. Disable bridging once more and then PM me a coppermine admin account.
Done!
Coppermine's bridging mechansim requires the usage of SMF's SSI.php to be fully operational. Your copy http://ofbboard.com/ofbforum/SSI.php returns a "500 internal server error". Fix that first - as suggested in the docs that come with coppermine, you need to make sure that your bridge app is working as expected before you can start bridging. Your copy of SMF is acting up.
Strange that! It just starts acting up out of the blue? Never had a problem with it before! So what now? upload a fresh copy of ssi.php?
Sorry but otherwise I have no idea.
I have no idea - this is related to SMF, not to coppermine. Ask for support on the SMF board. Usually, you can get more details for "500 Internal Server Errors" if you look at the server's log. This probably is something you have to check with your webhost. I really can't help you with your issues directly related to SMF.
Ok I went back to my site, uploaded another fresh copy of SSI.php (just to be sure) Then deactivated all my mods. and low and behold the bridge "WORKED" ;D . So I re-installed my mods one by one till I found the culprit! Now all is fine again.
Thank you very much for all your help and support :D
Bob
I have struggled a bit to follow this. But am I right in thinking one of your mods caused the problem ?? and if so which one ?
Quote from: glennk on November 10, 2008, 11:28:27 PM
But am I right in thinking one of your mods caused the problem ??
That's what he said.
Quote from: glennk on November 10, 2008, 11:28:27 PM
and if so which one ?
Powerbob doesn't visit this forum very often, so there is little use in asking him which mod was the culprit. Do as he suggested and turn all mods off. Then try if bridging works as expected. If it does, turn your mods back on, one after the other, and test carefully after each step when bridging stops working. That's what he did, which led him to success. You should do the same thing. If you're not ready to do so, start a thread of your own, doing exactly as suggested in the sticky thread When requesting bridge support - mandatory! (http://forum.coppermine-gallery.net/index.php/topic,24032.0.html)
The Mod was the Portal PortaMx, and they solved the problem in there software so now you can use Coppermine with there portal and SMF ;D
Thanks for your reply. Locking.