I have tried three times installing the bridge between Coppermine 1.4.20 and Simple Machines (SMF) 2.0/RC1 In all cases, the bridge works however it breaks the link to the avatars and uploads of the forum. I end up with a bunch of error messages from the SMF display.php on lines 1248 and 1367, every time the program calls for an uploaded avatar. Claims it is a permissions error but permissions are set properly.
Has anyone else run into this or do you know the mods or code changes the bridge makes when installed.
If I reinstall the forum with the exact same database and reconnect the avatars, everything is fine.
I'd start playing with code but I don't know what files the bridge modifies. I suspect there is some change being made that the two programs then don't like each other.
thanks
Paul
Please post the actual error messages.
The bridge doesn't modify anything in SMF.
Attached is a screen shot of my error log. Every time someone accesses a thread that has an uploaded avatar, it generates two errors, line 1248 and 1367 in the display.php page. Says it is permissions. Yet every permission is set to R/W (its on a windows server)
If I re-install the SMF software, the problem goes away, with making any permissions changes. As soon as I add the Coppermine bridge, all the custom avators go awol. They are still in the attachments folders but you can't view or use them.
Could Coppermine be referring the program to look to another area?
I've done this three times, the error is repeatable, I just can't find where it is occurring.
- Board rules / Forum policies: Post Links (http://forum.coppermine-gallery.net/index.php/topic,55415.msg270616.html#msg270616)
- Sticky thread: When requesting bridge support - mandatory! (http://forum.coppermine-gallery.net/index.php/topic,24032.0.html)
- Documentation: Bridging support (http://coppermine-gallery.net/demo/cpg14x/docs/index.htm#integrating_support_start)
Any particular reason for ignoring all those sources that you're suppossed to have read before being allowed to start a thread?
I run 2 sites with SMF RC1 and Coppermine 1.4.21 and have no problems with the bridge whatsoever. I think it's more likely a problem with your local install, but as "The admin" said in the previous post without the proper details we can not offer our help!