xp web publishing with punbb1.2 bridge error xp web publishing with punbb1.2 bridge error
 

News:

cpg1.5.48 Security release - upgrade mandatory!
The Coppermine development team is releasing a security update for Coppermine in order to counter a recently discovered vulnerability. It is important that all users who run version cpg1.5.46 or older update to this latest version as soon as possible.
[more]

Main Menu

xp web publishing with punbb1.2 bridge error

Started by scot405583, July 23, 2007, 07:58:08 AM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

scot405583

when i have the punbb1.2 bridge enable it will not allow me to connect using xp_publishing.i get an error (can't login in) .. i disable bridge and i can use xp publishing.

main directory is http://modelcrowd.com that where my forum is installed to.
and the gallery is http://modelcrowd.com/gallery

so in the bridge mod i have it set to
http://modelcrowd.com
and ../ for bbs locations
and it finds the ../img/avatars

what am i doing wrong here. I design style for punbb and port other themes and css templates over to punbb....

Scot aka (quaker) on punbb.org

Joachim Müller


scot405583

#2
and what does that mean? i did the steps...
Quote4.11.4 Upload troubleshooting

If you are experiencing issues with coppermine's upload process, temporarily change your coppermine settings as suggested below to get more detailed error messages:

    * Go to your coppermine page and log in as admin
    * Go to the config screen
    * Scroll to the bottom of the page
    * Expand the "Maintenance settings" section by clicking on it
    * Enable debug mode for everyone
    * Leave display of notices switched off
    * Save the new settings by clicking on "Save new configuration"
    * Go to the "groups" panel
    * Set the upload form configuration for all groups to "Single file uploads only" (set File upload boxes to "1", URI upload boxes to "0" and No. of boxes to "fixed")
    * Save your new settings


still nothing.....

Joachim Müller

Quote from: scot405583 on July 23, 2007, 08:11:12 AM
and what does that mean? i did the steps...
[...]
still nothing.....
Then re-read extra thoroughly. I'm quoting the entire section, highlighting the stuff that you obviously failed to read:
Quote4.11.4 Upload troubleshooting

If you are experiencing issues with coppermine's upload process, temporarily change your coppermine settings as suggested below to get more detailed error messages:

    * Go to your coppermine page and log in as admin
    * Go to the config screen
    * Scroll to the bottom of the page
    * Expand the "Maintenance settings" section by clicking on it
    * Enable debug mode for everyone
    * Leave display of notices switched off
    * Save the new settings by clicking on "Save new configuration"
    * Go to the "groups" panel
    * Set the upload form configuration for all groups to "Single file uploads only" (set File upload boxes to "1", URI upload boxes to "0" and No. of boxes to "fixed")
    * Save your new settings

Then try to upload (using http uploads, even if you experienced troubles using another upload method) - you should get a more detailed error message that tells you what exactly goes wrong with your uploads. If the error message doesn't mean anything to you, search the support board for the error message you get.
When asking for support on the coppermine forum, post a link to your site and a test user account (the test user mustn't be in the admin group!) with upload privileges, with the above mentioned settings in place - this way, supporters can see the error messages as well. Do not post debug_output unless requested.

When people have issues with uploading and decide to post their question on the Coppermine support board, they usually are told to read this upload troubleshooting section. Many of them fail to do so properly, which results in frustration both for users as well as supporters. To make this absolutely clear: the above mentioned steps are absolutely mandatory, no matter what skill level you have, no matter what upload method you have troubles with. Failing to do exactly as suggested will result in your request for help being ignored. Yes, this applies to you. We mean it!

scot405583

thanks for the help! i ask nibbler the question and he gave me the answer on the first try. i must login to coppermine first then to punbb before the xp_publisher will work....

thanks
scot

Joachim Müller

Thanks for returning and posting your solution. However, asking developers or supporters directly (by PM or email) for individual support is not permitted according to board rules (you agreed to respect them when signing up), so in the future do as suggested.
Marking thread as "solved".

scot405583

I understand the rules, i didn't ask him on this forum. he is a member of punbb. and i didn't contact him directly via email.

seem to be a faster forum and getting answer...

http://punbb.org/forums/viewtopic.php?pid=98500#p98500

thank you for your help!


scot