Unable to enable Bridging

[hoss021]

Ok here is the scoop of installing coppermine on my smf board.  I recently installed CPG1.4.14 stable version, I am attempting to enable the sharing of my SMF Members to the Gallery section, when I attempt to bridge, I get to the type of board SMF 2.x, then it asks for the locations, I update that, and then I click on next, and when it gets to disable / enable, ENABLE does not work.  I attempted to verify the paths are correct but to no avail, still unable to do so.. any help / support if available is greatly appreciated.
Thanks

Coppermine install: http://www.aftershockcc.com/gallery/
Forum install: http://aftershockcc.com/gallery
Coppermine version: cpg1.4.14 (stable)
Forum version: smf 1.1.4
Test user account: test / test

BridgeManager settings:
Forum URL:  http://www.aftershockcc.com/forums
Relative path to your BBS's config file:  ../forums/ 
Use post-based groups?:  0
Cookie name/preifx

Unable to set  use post-based groups and did not have cookie name/prefix setup.

[Joachim Müller]

Forum install: http://aftershockcc.com/gallery

That's wrong, should be Forum install: http://www.aftershockcc.com/forums/

Bridging isn't enabled. What do you want us to look at?

[hoss021]

I'm sorry for the long delay, but I can not enable the bridging.  I use the correct URL for the forums, but I can not enable the bridge.  They are on different DB from apache.

[hoss021]

what happens is after the bridge I get

"There was an error while processing a database query "
So I need to have the gallery on the same DB for this to bridge correctly?

[Joachim Müller]

So I need to have the gallery on the same DB for this to bridge correctly?

Not necesarilly.

"There was an error while processing a database query "

Enable debug_mode in coppermine's config to see the actual query that causes the fatal error. Post the error message here (not the debug_output).

[MattBW]

I have exactly the same problem, I click enable, and it refreshes with disabled once finish has been clicked.

USER:
------------------
Array
(
    [ID] => 3aa9dbc3c992d15e721e382ec38ad9c0
    [am] => 1
    [lang] => english
)

==========================
USER DATA:
------------------
Array
(
    [user_id] => 1
    [user_name] => admin
    [groups] => Array
        (
           

• => 1
          )
  
      [disk_max] => 0
      [disk_min] => 0
      [can_rate_pictures] => 1
      [can_send_ecards] => 1
      [ufc_max] => 3
      [ufc_min] => 3
      [custom_user_upload] => 0
      [num_file_upload] => 5
      [num_URI_upload] => 3
      [can_post_comments] => 1
      [can_upload_pictures] => 1
      [can_create_albums] => 1
      [has_admin_access] => 1
      [pub_upl_need_approval] => 0
      [priv_upl_need_approval] => 0
      [group_name] => Administrators
      [upload_form_config] => 3
      [group_quota] => 0
      [can_see_all_albums] => 1
      [group_id] => 1
  )
  
  ==========================
  Queries:
  ------------------
  Array
  (
     
• => SELECT extension, mime, content, player FROM cpg_filetypes; (0.002s)
      [1] => select * from cpg_plugins order by priority asc; (0s)
      [2] => delete from `nuke`.cpg_sessions where time<1199269688 and remember=0; (0.001s)
      [3] => delete from `nuke`.cpg_sessions where time<1198063688; (0s)
      [4] => select user_id from `nuke`.cpg_sessions where session_id=md5("e8458f6b2f3cd41d46a169832afd1c202113689c7946ef67c087c3e15fb80b1a"); (0.001s)
      [5] => select user_id as id, user_password as password from `nuke`.cpg_users where user_id=1 (0s)
      [6] => SELECT u.user_id AS id, u.user_name AS username, u.user_password AS password, u.user_group+100 AS group_id FROM `nuke`.cpg_users AS u INNER JOIN `nuke`.cpg_usergroups AS g ON u.user_group=g.group_id WHERE u.user_id='1' (0.001s)
      [7] => SELECT user_group_list FROM `nuke`.cpg_users AS u WHERE user_id='1' and user_group_list <> ''; (0s)
      [8] => SELECT MAX(group_quota) as disk_max, MIN(group_quota) as disk_min, MAX(can_rate_pictures) as can_rate_pictures, MAX(can_send_ecards) as can_send_ecards, MAX(upload_form_config) as ufc_max, MIN(upload_form_config) as ufc_min, MAX(custom_user_upload) as custom_user_upload, MAX(num_file_upload) as num_file_upload, MAX(num_URI_upload) as num_URI_upload, MAX(can_post_comments) as can_post_comments, MAX(can_upload_pictures) as can_upload_pictures, MAX(can_create_albums) as can_create_albums, MAX(has_admin_access) as has_admin_access, MIN(pub_upl_need_approval) as pub_upl_need_approval, MIN( priv_upl_need_approval) as  priv_upl_need_approval FROM cpg_usergroups WHERE group_id in (1) (0.001s)
      [9] => SELECT group_name FROM  cpg_usergroups WHERE group_id= 1 (0.001s)
      [10] => update `nuke`.cpg_sessions set time='1199273288' where session_id=md5('e8458f6b2f3cd41d46a169832afd1c202113689c7946ef67c087c3e15fb80b1a'); (0.001s)
      [11] => SELECT user_favpics FROM cpg_favpics WHERE user_id = 1 (0s)
      [12] => DELETE FROM cpg_banned WHERE expiry < '2008-01-02 11:28:08' (0.035s)
      [13] => SELECT * FROM cpg_banned WHERE (ip_addr='195.92.109.20' OR ip_addr='195.92.109.20' OR user_id=1) AND brute_force=0 (0.041s)
      [14] => SELECT COUNT(*) FROM cpg_pictures WHERE approved = 'NO' (0s)
      [15] => SELECT * FROM cpg_bridge (0s)
      [16] => UPDATE cpg_config SET value = '1' WHERE name = 'bridge_enable' (0.001s)
      [17] => SELECT * FROM cpg_bridge (0s)
      [18] => SELECT * FROM cpg_config (0.001s)
      [19] => DELETE FROM cpg_usergroups WHERE 1 (0.096s)
      [20] => INSERT INTO cpg_usergroups
                          VALUES (1, 'Administrators', 0, 1, 1, 1, 1, 1, 1, 0, 0, 3, 0, 5, 3) (0.001s)
      [21] => INSERT INTO cpg_usergroups
                          VALUES (2, 'Registered', 1024, 0, 1, 1, 1, 1, 1, 1, 0, 3, 0, 5, 3) (0s)
      [22] => INSERT INTO cpg_usergroups
                          VALUES (3, 'Anonymous', 0, 0, 1, 0, 0, 0, 0, 1, 1, 0, 0, 5, 3) (0s)
      [23] => INSERT INTO cpg_usergroups
                          VALUES (4, 'Banned', 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 5, 3) (0s)
  )
  
  ==========================
  GET :
  ------------------
  Array
  (
  )
  
  ==========================
  POST :
  ------------------
  Array
  (
      [bridge_enable] => 1
      [submit] => Finish
      [step] => finalize
      [force_startpage] => 1
  )
  
  ==========================
  VERSION INFO :
  ------------------
  PHP version: 4.4.2 - OK
  ------------------
  mySQL version: 4.1.11
  ------------------
  Coppermine version: 1.4.10(stable)
  ==========================
  Module: GD
  ------------------
  GD Version: bundled (2.0.28 compatible)
  FreeType Support:
  T1Lib Support:
  GIF Read Support: 1
  GIF Create Support: 1
  JPG Support: 1
  PNG Support: 1
  WBMP Support: 1
  XBM Support: 1
  JIS-mapped Japanese Font Support:
  
  ==========================
  Module: mysql
  ------------------
  MySQL Supportenabled
  Active Persistent Links 0
  Active Links 1
  Client API version 4.1.11
  MYSQL_MODULE_TYPE external
  MYSQL_SOCKET /var/lib/mysql/mysql.sock
  MYSQL_INCLUDE -I/usr/home/builder/pb_work_dir/plesk7.5.4_hotfix6_7.5.4/psa/release/dist/usr/local/psa/mysql/include/mysql
  MYSQL_LIBS -L/usr/home/builder/pb_work_dir/plesk7.5.4_hotfix6_7.5.4/psa/release/dist/usr/local/psa/mysql/lib/mysql -lmysqlclient 
  ==========================
  Module: zlib
  ------------------
  ZLib Support enabled
  Compiled Version 1.1.4
  Linked Version 1.1.4    
  ==========================
  Server restrictions (safe mode)?
  ------------------
  Directive | Local Value | Master Value
  safe_mode | On | On
  safe_mode_exec_dir | /nonexec | /nonexec
  safe_mode_gid | On | Off
  safe_mode_include_dir | no value | no value
  safe_mode_exec_dir | /nonexec | /nonexec
  sql.safe_mode | Off | Off
  disable_functions | no value | no value
  file_uploads | On | On
  include_path | .:/usr/local/psa/apache/lib/php | .:/usr/local/psa/apache/lib/php
  open_basedir | /usr/local/psa/home/vhosts/lrp-alliance.com/httpdocs:/tmp | no value
  ==========================
  email
  ------------------
  Directive | Local Value | Master Value
  sendmail_from | me@localhost.com | me@localhost.com
  sendmail_path | /usr/sbin/sendmail -t -i -fCL2243 | /usr/sbin/sendmail -t -i
  SMTP | localhost | localhost
  smtp_port | 25 | 25
  ==========================
  Size and Time
  ------------------
  Directive | Local Value | Master Value
  max_execution_time | 30 | 30
  max_input_time | -1 | -1
  upload_max_filesize | 17M | 17M
  post_max_size | 16M | 16M
  ==========================
  Page generated in 0.579 seconds - 24 queries in 0.183 seconds - Album set : ; Meta set: ;
  

[Joachim Müller]

I have exactly the same problem, I click enable, and it refreshes with disabled once finish has been clicked.

You may or may not have the same issue. 
However, you broke some rules:
1) Don't try to hijack other's threads.
2) There is a sticky thread on this sub-board labelled "When requesting bridge support - mandatory!" as well as a documentation section named "Bridging support". Do exactly as suggested there. There is a reason why we have that sticky thread and why it has been named that way.
3) Don't post debug_output unless a supporter explicitely asks for it! I told the thread starter to enable debug_mode and post the error message. I told him explicitely not to post debug_output!

So stay out of this thread and do as suggested instead.