Ok here is the scoop of installing coppermine on my smf board. I recently installed CPG1.4.14 stable version, I am attempting to enable the sharing of my SMF Members to the Gallery section, when I attempt to bridge, I get to the type of board SMF 2.x, then it asks for the locations, I update that, and then I click on next, and when it gets to disable / enable, ENABLE does not work. I attempted to verify the paths are correct but to no avail, still unable to do so.. any help / support if available is greatly appreciated.
Thanks
Coppermine install: http://www.aftershockcc.com/gallery/
Forum install: http://aftershockcc.com/gallery
Coppermine version: cpg1.4.14 (stable)
Forum version: smf 1.1.4
Test user account: test / test
BridgeManager settings:
Forum URL: http://www.aftershockcc.com/forums
Relative path to your BBS's config file: ../forums/
Use post-based groups?: 0
Cookie name/preifx
Unable to set use post-based groups and did not have cookie name/prefix setup.
Quote from: hoss021 on December 13, 2007, 04:52:54 AM
Forum install: http://aftershockcc.com/gallery
That's wrong, should be
Forum install: http://www.aftershockcc.com/forums/Bridging isn't enabled. What do you want us to look at?
I'm sorry for the long delay, but I can not enable the bridging. I use the correct URL for the forums, but I can not enable the bridge. They are on different DB from apache.
what happens is after the bridge I get
"There was an error while processing a database query "
So I need to have the gallery on the same DB for this to bridge correctly?
Quote from: hoss021 on December 29, 2007, 08:29:05 PM
So I need to have the gallery on the same DB for this to bridge correctly?
Not necesarilly.
Quote from: hoss021 on December 29, 2007, 08:29:05 PM
"There was an error while processing a database query "
Enable debug_mode in coppermine's config to see the actual query that causes the fatal error. Post the error message here (not the debug_output).
I have exactly the same problem, I click enable, and it refreshes with disabled once finish has been clicked.
Quote
USER:
------------------
Array
(
[ID] => 3aa9dbc3c992d15e721e382ec38ad9c0
[am] => 1
[lang] => english
)
==========================
USER DATA:
------------------
Array
(
[user_id] => 1
[user_name] => admin
[groups] => Array
(
- => 1
)
[disk_max] => 0
[disk_min] => 0
[can_rate_pictures] => 1
[can_send_ecards] => 1
[ufc_max] => 3
[ufc_min] => 3
[custom_user_upload] => 0
[num_file_upload] => 5
[num_URI_upload] => 3
[can_post_comments] => 1
[can_upload_pictures] => 1
[can_create_albums] => 1
[has_admin_access] => 1
[pub_upl_need_approval] => 0
[priv_upl_need_approval] => 0
[group_name] => Administrators
[upload_form_config] => 3
[group_quota] => 0
[can_see_all_albums] => 1
[group_id] => 1
)
==========================
Queries:
------------------
Array
(
- => SELECT extension, mime, content, player FROM cpg_filetypes; (0.002s)
[1] => select * from cpg_plugins order by priority asc; (0s)
[2] => delete from `nuke`.cpg_sessions where time<1199269688 and remember=0; (0.001s)
[3] => delete from `nuke`.cpg_sessions where time<1198063688; (0s)
[4] => select user_id from `nuke`.cpg_sessions where session_id=md5("e8458f6b2f3cd41d46a169832afd1c202113689c7946ef67c087c3e15fb80b1a"); (0.001s)
[5] => select user_id as id, user_password as password from `nuke`.cpg_users where user_id=1 (0s)
[6] => SELECT u.user_id AS id, u.user_name AS username, u.user_password AS password, u.user_group+100 AS group_id FROM `nuke`.cpg_users AS u INNER JOIN `nuke`.cpg_usergroups AS g ON u.user_group=g.group_id WHERE u.user_id='1' (0.001s)
[7] => SELECT user_group_list FROM `nuke`.cpg_users AS u WHERE user_id='1' and user_group_list <> ''; (0s)
[8] => SELECT MAX(group_quota) as disk_max, MIN(group_quota) as disk_min, MAX(can_rate_pictures) as can_rate_pictures, MAX(can_send_ecards) as can_send_ecards, MAX(upload_form_config) as ufc_max, MIN(upload_form_config) as ufc_min, MAX(custom_user_upload) as custom_user_upload, MAX(num_file_upload) as num_file_upload, MAX(num_URI_upload) as num_URI_upload, MAX(can_post_comments) as can_post_comments, MAX(can_upload_pictures) as can_upload_pictures, MAX(can_create_albums) as can_create_albums, MAX(has_admin_access) as has_admin_access, MIN(pub_upl_need_approval) as pub_upl_need_approval, MIN( priv_upl_need_approval) as priv_upl_need_approval FROM cpg_usergroups WHERE group_id in (1) (0.001s)
[9] => SELECT group_name FROM cpg_usergroups WHERE group_id= 1 (0.001s)
[10] => update `nuke`.cpg_sessions set time='1199273288' where session_id=md5('e8458f6b2f3cd41d46a169832afd1c202113689c7946ef67c087c3e15fb80b1a'); (0.001s)
[11] => SELECT user_favpics FROM cpg_favpics WHERE user_id = 1 (0s)
[12] => DELETE FROM cpg_banned WHERE expiry < '2008-01-02 11:28:08' (0.035s)
[13] => SELECT * FROM cpg_banned WHERE (ip_addr='195.92.109.20' OR ip_addr='195.92.109.20' OR user_id=1) AND brute_force=0 (0.041s)
[14] => SELECT COUNT(*) FROM cpg_pictures WHERE approved = 'NO' (0s)
[15] => SELECT * FROM cpg_bridge (0s)
[16] => UPDATE cpg_config SET value = '1' WHERE name = 'bridge_enable' (0.001s)
[17] => SELECT * FROM cpg_bridge (0s)
[18] => SELECT * FROM cpg_config (0.001s)
[19] => DELETE FROM cpg_usergroups WHERE 1 (0.096s)
[20] => INSERT INTO cpg_usergroups
VALUES (1, 'Administrators', 0, 1, 1, 1, 1, 1, 1, 0, 0, 3, 0, 5, 3) (0.001s)
[21] => INSERT INTO cpg_usergroups
VALUES (2, 'Registered', 1024, 0, 1, 1, 1, 1, 1, 1, 0, 3, 0, 5, 3) (0s)
[22] => INSERT INTO cpg_usergroups
VALUES (3, 'Anonymous', 0, 0, 1, 0, 0, 0, 0, 1, 1, 0, 0, 5, 3) (0s)
[23] => INSERT INTO cpg_usergroups
VALUES (4, 'Banned', 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 5, 3) (0s)
)
==========================
GET :
------------------
Array
(
)
==========================
POST :
------------------
Array
(
[bridge_enable] => 1
[submit] => Finish
[step] => finalize
[force_startpage] => 1
)
==========================
VERSION INFO :
------------------
PHP version: 4.4.2 - OK
------------------
mySQL version: 4.1.11
------------------
Coppermine version: 1.4.10(stable)
==========================
Module: GD
------------------
GD Version: bundled (2.0.28 compatible)
FreeType Support:
T1Lib Support:
GIF Read Support: 1
GIF Create Support: 1
JPG Support: 1
PNG Support: 1
WBMP Support: 1
XBM Support: 1
JIS-mapped Japanese Font Support:
==========================
Module: mysql
------------------
MySQL Supportenabled
Active Persistent Links 0
Active Links 1
Client API version 4.1.11
MYSQL_MODULE_TYPE external
MYSQL_SOCKET /var/lib/mysql/mysql.sock
MYSQL_INCLUDE -I/usr/home/builder/pb_work_dir/plesk7.5.4_hotfix6_7.5.4/psa/release/dist/usr/local/psa/mysql/include/mysql
MYSQL_LIBS -L/usr/home/builder/pb_work_dir/plesk7.5.4_hotfix6_7.5.4/psa/release/dist/usr/local/psa/mysql/lib/mysql -lmysqlclient
==========================
Module: zlib
------------------
ZLib Support enabled
Compiled Version 1.1.4
Linked Version 1.1.4
==========================
Server restrictions (safe mode)?
------------------
Directive | Local Value | Master Value
safe_mode | On | On
safe_mode_exec_dir | /nonexec | /nonexec
safe_mode_gid | On | Off
safe_mode_include_dir | no value | no value
safe_mode_exec_dir | /nonexec | /nonexec
sql.safe_mode | Off | Off
disable_functions | no value | no value
file_uploads | On | On
include_path | .:/usr/local/psa/apache/lib/php | .:/usr/local/psa/apache/lib/php
open_basedir | /usr/local/psa/home/vhosts/lrp-alliance.com/httpdocs:/tmp | no value
==========================
email
------------------
Directive | Local Value | Master Value
sendmail_from | me@localhost.com | me@localhost.com
sendmail_path | /usr/sbin/sendmail -t -i -fCL2243 | /usr/sbin/sendmail -t -i
SMTP | localhost | localhost
smtp_port | 25 | 25
==========================
Size and Time
------------------
Directive | Local Value | Master Value
max_execution_time | 30 | 30
max_input_time | -1 | -1
upload_max_filesize | 17M | 17M
post_max_size | 16M | 16M
==========================
Page generated in 0.579 seconds - 24 queries in 0.183 seconds - Album set : ; Meta set: ;
Quote from: MattBW on January 02, 2008, 12:58:18 PM
I have exactly the same problem, I click enable, and it refreshes with disabled once finish has been clicked.
You may or may not have the same issue. ::)
However, you broke some rules:
1) Don't try to hijack other's threads.
2) There is a sticky thread on this sub-board labelled "When requesting bridge support - mandatory! (http://forum.coppermine-gallery.net/index.php?topic=24032.0)" as well as a documentation section named "Bridging support (http://coppermine-gallery.net/demo/cpg14x/docs/index.htm#integrating_support_start)". Do
exactly as suggested there. There is a reason why we have that sticky thread and why it has been named that way.
3) Don't post debug_output unless a supporter explicitely asks for it! I told the thread starter to enable debug_mode and post the error message. I told him explicitely
not to post debug_output!
So stay out of this thread and do as suggested instead.