copy/ paste bbcode img URL below intermediate image

[bugattibuilder]

I am using this mod for some time now, and I really like it.

However, would it be possible to alter the code in such a way, that it behaves like this:

-pressing the copy button will generate the code for displaying the intermediate image, linking to the large image. (simple till so far) BUT...

-when the larger image is smaller than the intermediate would be (normally 400 pixels), there is no intermediate. Instead of generating code for the intermediate, generate the code for the original picture. (which could link to itself, or no link at all)


Optionally, this could be split in 2 different "code" buttons, but users could then mess up the forum layout, by accidentally posting 2048 pixel wide pictures... i like to prevent that. (for which I did not succeed yet, I have trouble generating the neccesary code for the "original" option)

[phill104]

-pressing the copy button will generate the code for displaying the intermediate image, linking to the large image. (simple till so far)

Change this line from this

Code Select Expand

$thumb_url = get_pic_url($pic_data, 'thumb'); //thumb url

to this

Code Select Expand

$thumb_url = get_pic_url($pic_data, 'normal'); //normal url

For smaller images the smaller image will still work as an intermediate.

[bugattibuilder]

Tested this with a 240x240 px picture, but this generates a red cross (empty placeholder) for the picture.

The code generated is: (I crippled the url tags

url=http://www.domain.com/photo/albums/userpics/10003/1384/picture240px.jpg](https://coppermine-gallery.com/forum/proxy.php?request=http%3A%2F%2Fwww.domain.com%2Fphoto%2Falbums%2Fuserpics%2F10003%2F1384%2F%255Bb%255Dnormal_picture240px.jpg%255B%2Fb%255D&hash=0c954aa63da6b0b16dca25c986a31669ae09243a)[/url

Which is OK for pictures over 400 px (my intermediate size). However, for smaller pictures it should read:

url=http://www.domain.com/photo/albums/userpics/10003/1384/picture240px.jpg](https://coppermine-gallery.com/forum/proxy.php?request=http%3A%2F%2Fwww.domain.com%2Fphoto%2Falbums%2Fuserpics%2F10003%2F1384%2F%255Bb%255Dpicture240px.jpg%255B%2Fb%255D&hash=07e93e65e1e96970f416ccc9e3a881bda6bd61d6)[/url

[Stramm]

two possibilities...
1. you do all the checks as in function theme_html_picture(). As result you know whether to use the fullsized or not.
2. you just check if a normal_ file exists. If yes, do what you intend to do, if not, do something else

http://php.net/manual/de/function.file-exists.php

Code Select Expand

$normal_url = get_pic_url($pic_data, 'normal'); //normal url
if (file_exists($normal_url)) {
//do something
} else {
//doesn't exist, do something else
}



[bugattibuilder]

I am going to try. It is my first attempt at PHP, so could take a while, I will post my results.

[Stramm]

on a second thought... using URLs with file_exists may not necessarily work in all environments as expected. So it's better to use the server path

Code Select Expand


this is the path to the fullsized
$CONFIG['fullpath'].$pic_data['filepath'].$pic_data['filename']

and the intermediate
$CONFIG['fullpath'].$pic_data['filepath'].$CONFIG['normal_pfx'].$pic_data['filename']

us it eg. like

Code Select Expand


//does the normal file exist??
if (file_exists($CONFIG['fullpath'].$pic_data['filepath'].$CONFIG['normal_pfx'].$pic_data['filename'])) {
//do something eg. display bbcode for the intermediate image
$fullsize_url = get_pic_url($pic_data, 'normal');
} else {
//intermediate doesn't exist, do something else eg. print bbcode for fullsized image
$fullsize_url = get_pic_url($pic_data);
}


if you replace in codebase.php

Code Select Expand

$fullsize_url = get_pic_url($pic_data);  //here we grab the url to the fullsized pic

with the above, then the plugin prints the intermediate URL if that file exists, otherwise the fullsized... haven't tested it

[Jacob2122002]

Works great but whenever I look at a picture it stretches the page all the way across my screen? So I have to scroll to the right all the way until I see the picture.

Is that because of my screen resolution or is there a way to fix it?

[Nibbler]

Post a link. Make sure you don't have debug mode enabled.

[Jacob2122002]

Post a link. Make sure you don't have debug mode enabled.

Nope, debug mode isn't on.

(its just a personal photo album)

http://jacobs-space.com/copperminenew/index.php

[Nibbler]

Caused by this:

Code Select Expand

<table align="center" width="9999">

I don't know where that came from; it's not a part of the plugin.

[Jacob2122002]

Caused by this:

Code Select Expand

<table align="center" width="9999">

I don't know where that came from; it's not a part of the plugin.

I'm kinda new at this stuff....how would I take that out lol? And would I take out that whole line of code or just the width part?

[Nibbler]

The whole line. First though, update your gallery to latest. 1.4.18. Then check in the plugin's codebase.php for that line.

[Jacob2122002]

Code Select Expand

//this just brings everything in form... we create a table etc.
$bbcode_data = '<table align="center" width="'.$CONFIG['picture_width'].'">'.$script_data.'<tr>';
$bbcode_data .= '<td>[url][img][/url]</td>';

That is the lines I see. But there's not 9999 it just says "$CONFIG" ?

[Nibbler]

That would indicate you have set 'Max width or height of an intermediate picture/video' to 9999 in config. Set it to something sensible instead.

[Jacob2122002]

That would indicate you have set 'Max width or height of an intermediate picture/video' to 9999 in config. Set it to something sensible instead.

Thank you so much  It's working now. I would of never though haha

Thank you again for the help 

[mooxe]

Hi Guys,

A couple questions...

I am trying to place the code after the image title & description. I can place it above or below the image, thats all I can figure out though.

Am also trying to change the textarea to be one line vice however many it takes the URL to fit in a 40col wide area, without expanding the columns. I managed to do it on my other site but cant figure out the coppermine code. So for example, when a user clicks the text he simply scrolls left or right not up and down.

MOOXE

[uglycars]

how do I enable hotlinking to get this plugin to work?

Sorry, I'm a newb.

[uglycars]

anyone??!!

[Stramm]

That's a question related to your server setup. No one here even knows what OS you're running so it's hard to give you advice. Usually you ask your webhost for questions related to your server. Hotlinking on *nix systems can be setup in a htaccess file or in the apache config file (if you're using the apache webserver - httpd.conf).

[mc0676]

He Stramm, i've a problem with your plugin.
How u can see here:
http://www.vwgolfcommunity.com/cpg/displayimage.php?album=311&pos=2

The code are not central with the image.

What do u think i need to do to solve this problem ?